Newsroom, your daily review

Keep up with the latest in the tableting community!


Video

Vincent Mazel - University of Bordeaux

May 15, 2021

Video replay - Influence of the unloading conditions on capping and lamination during tableting

MySTYL'One members exclusive!

Watch the replay of the presentation delivered by Vincent Mazel (user of a STYL'One Evolution, University of Bordeaux, France) during the 12th APV PBP World meeting.

#video #capping #lamination #study #university of Bordeaux #unloading #webinar

Feature article

MEDELPHARM

May 3, 2021

Troubleshooting tablet defects in no-time

There are numerous tablet defects: chipping, picking & sticking, cracking, lamination & capping to name a few.

Lamination & capping often occur during scale-up and are main issues in our industry. Capping is the partial or complete removal of the crown of a tablet from the main body, while lamination is the separation of a tablet into two or more distinct layers. However, those 2 phenomenon share similar causes...

#troubleshooting #deffect #tablet

Feature article

Bruno Villa & Bruno Leclercq

April 3, 2021

Containment is a growing demand in R&D tableting equipment

The principle « better safe than sorry » is now widely applied in containment, mainly due to the following key factors: The number one factor is the stringent Labor Protection Law. An increase in safety rules and regulations for the workforce imposes strict control of operator exposure. Secondly with the increase of product efficiency and powders being more and more active, a higher level of protection has become necessary to ensure operation safety. Finally, with the advance of science we ar...

The principle « better safe than sorry » is now widely applied in containment, mainly due to the following key factors: The number one factor is the stringent Labor Protection Law. An increase in safety rules and regulations for the workforce imposes strict control of operator exposure. Secondly with the increase of product efficiency and powders being more and more active, a higher level of protection has become necessary to ensure operation safety. Finally, with the advance of science we are more aware of risks created by active materials and more cautious about...

Announcement

MySTYLOne

March 30, 2021

A Targeted force in study mode on Analis software

MySTYL'One user exclusive!

Head to the bulletins section to learn more on the differences between your target force and output force on your STYL’One Evo and improve your system response and be as close as possible to your target force!

#controller #powder rearrangement #target force

Feature article

MEDELPHARM

March 23, 2021

A QbD approach to shorten tablets development time

Reducing “time to market” is the ultimate goal for every pharmaceutical lab. Being the first on the market brings a competitive advantage for prescription, over-the-counter, or generic-drug manufacturers. Applying quality-by-design (QbD) principles at the formulation phase can prevent tablet defects at an early stage and thereby drastically reduce time during the complex and troublesome phase of “scale-up”.

#troubleshooting #QbD #development

Press review

www.danone.com

March 18, 2021

Meiji & Danone partnering to offer pre-measured tab format formula milk in the UK

Danone has announced the commercialization of milk-powder tablets in the UK thanks to a partnership with the Japanese company Meiji which owns the patent for such pre-measured tab format. Meiji’s development has been made possible thanks to the STYL’One Evo compaction simulator. Check out Danone's press release and Meiji’s technology on Danone's website.

#meiji #danone #food #tabletting

Announcement

Skyepharma

March 15, 2021

STYL’One Evolution / Industrial rotary press correlation study on a tab-in-tab dosage form

MySTYL'One users exclusive!

Flashback on Aline Moulin (Skyepharma)'s presentation at CSF Cambridge 2018.

Discover the presentation of Skyepharma's study: "Correlation between STYL’One Evolution and an industrial rotary press on a tab-in-tab dosage form" directly in our library of bulletins (access is only open to STYL'One users)

#multilayer #controlled release #industrial rotary press #compaction simulator #tab-in-tab

Feature article

MySTYL'One

March 4, 2021

Webinar transcript – External Lubrication: How to mitigate the impact of lubricants on your quality attributes

On February 17th, Cedrine de Backere, PhD Student from Ghent University (Belgium) presented her work on external lubrication and how to mitigate the impact of lubricants on quality attributes. Bruno Leclercq, MEDELPHARM’s Science Lab Head and Business Developer also presented innovations from MEDELPHARM on external lubrication. The session ended with a Q&A.

For those who could not join us you can freely access the transcript below.

Note: the registered members of MySTYL’One can access ...

On February 17th, Cedrine de Backere, PhD Student from Ghent University (Belgium) presented her work on external lubrication and how to mitigate the impact of lubricants on quality attributes. Bruno Leclercq, MEDELPHARM’s Science Lab Head and Business Developer also presented innovations from MEDELPHARM on external lubrication. The session ended with a Q&A.

For those who could not join us you can freely access the transcript below.

Note: the registered members of MySTYL’One can access the full video of the webinar HERE. 

#STYL'One evo #external lubrication #transcript #webinar

Press review

www.pharmaphorum.com

March 3, 2021

UCB and Microsoft announce digital drug R&D tie-up

UCB's announced a new partnership in order to integrate IA technologies as a tool for its development.The aim is to "significantly accelerate the iteration cycles required to identify more effective molecules".

The complete Press article can be found here.


#formulation #IA #UCB #development

Press review

www.cphi-online.com

Feb. 23, 2021

Pharma manufacturing going digital in bid for quality and efficiency

This article we've spotted on CPhI's website shows that the pharma industry is changing its mindset for a new exciting leap into embracing IOT and adopting manufacturing digital innovation.

More to be read on this website.

#industry news #digital transformation #IOT

Page 2 of 6

Publish with us!